California Mechanical Acceptance Testing

Mechanical acceptance testing is a required process in California that makes sure new or updated HVAC equipment works the way it should and meets the state’s current energy code standards. As part of this process, a Certified Mechanical Acceptance Testing Technician (CMATT) completes the appropriate NRCA forms, which document that each mechanical system has been tested and meets all Title 24 requirements. These forms include step-by-step checklists that confirm the system turns on, operates, and responds correctly. This helps prevent future issues, saves energy, and ensures the equipment is installed properly.

It’s important to know that mechanical acceptance testing does not replace regular testing and balancing (TAB) or full commissioning. Those steps are still needed to check airflow, system performance, and overall building operation before an occupancy permit can be approved. Mechanical acceptance testing—along with the completed NRCA forms—simply works alongside these procedures to make sure the HVAC system is safe, efficient, and fully code-compliant in California.

By completing Title 24 HVAC testing and submitting the correct NRCA forms, building owners, contractors, and designers gain confidence that the all air system are set up correctly, meet California’s strict standards, and are ready for long-term, reliable performance. 

Delo Air is fully equipped to provide all NRCA forms needed for your project, call us today for your Title 24 compliant mechanical acceptance testing in California.

CONTACT US

Mechanical Acceptance Testing Forms Our Team Provides:

Currently, as of 2023, there are 19 different mechanical acceptance testing forms that may be required for any individual mechanical project, they are:

  • NRCA-MCH-02-A (Outdoor Air Acceptance)
  • NRCA-MCH-03-A (Constant Volume, Single Zone, Unitary (Packaged And Split_ Air Conditioner And Heat Pump Systems)
  • NRCA-MCH-04a-H (Air Distribution Duct Leakage)
  • NRCA-MCH-04b-A (Air Distribution Duct Leakage)
  • NRCA-MCH-05-A (Air Economizer Controls Acceptance)
  • NRCA-MCH-06-A (Demand Control Ventilation Systems Acceptance)
  • NRCA-MCH-07-A (Supply Fan Variable Flow Controls Acceptance)
  • NRCA-MCH-08-A (Valve Leakage Test)
  • NRCA-MCH-09-A (Supply Water temperature reset Controls Acceptance)
  • NRCA-MCH-10-A (Hydronic Systems variable Flow Control Acceptance)
  • NRCA-MCH-11-A (Automatic Demand Shed Control Acceptance)
  • NRCA-MCH-12-A (Fault Detection And Diagnostics For Packaged Direct Expansion Units)
  • NRCA-MCH-13-A (Automatic Fault Detection and Diagnostic For Air Handling Units And Zone Terminal Units Acceptance)
  • NRCA-MCH-14-A (Distribution Energy Storage DX AC System Acceptance)
  • NRCA-MCH-15-A (Thermal Energy Storage (TES) System Acceptance)
  • NRCA-MCH-16-A (Supply Air Temperature Reset Controls Acceptance)
  • NRCA-MCH-17-A (Condenser Water Supply Temperature Reset Controls Acceptance)
  • NRCA-MCH-18-A (Energy Management Control System Acceptance)
  • NRCA-MCH-19-A (Occupied Standby Acceptance)
Mechanical acceptance testing form

Title 24

Title 24 is California’s official Building Standards Code, a statewide set of rules that guides how buildings are designed, constructed, and maintained. The part most relevant to HVAC and energy performance is Title 24, Part 6—California’s Energy Code. This section sets the minimum energy-efficiency requirements for heating, cooling, ventilation, lighting, and overall building performance.

Frequently Asked Questions

Only individuals who are certified through an ATTCP (Acceptance Testing Certification Provider) are allowed to perform mechanical acceptance testing. At this time, the only approved ATTCPs in California are RSES, NEBB, NEMIC/TAAB, and The United Association. Technicians who earn certification through any of these providers are officially recognized as Mechanical Acceptance Testing Technicians (MATTs), qualifying them to complete the required Title 24 mechanical acceptance testing and NRCA documentation.

Preparing properly for a mechanical acceptance test helps ensure the inspection goes smoothly and prevents delays in completing your Title 24 requirements. Before the technician arrives, the building owner, contractor, or HVAC installer should make sure:

  1. All HVAC equipment is fully installed and operational
    The system must be powered, started up, and running correctly. Mechanical acceptance testing cannot be performed on incomplete or non-functional equipment.

  2. Controls and thermostats are programmed and accessible
    Items such as economizers, demand-control ventilation, VFDs, and thermostats must be set up according to the design plans so the technician can verify their operation.

  3. All required NRCA forms are ready and filled out as much as possible
    The technician will complete the testing portions, but basic project information should be prepared in advance.

  4. Mechanical drawings and submittals are available
    This includes equipment schedules, control diagrams, sequences of operation, and any documents that help confirm the system matches the approved plans.

  5. Testing and Balancing (TAB) is complete when required
    Since MAT does not replace TAB, airflow and system performance should already be verified.

  6. Access to all equipment is clear and safe
    Rooftops, mechanical rooms, panels, and control boxes should be reachable without obstruction.

  7. All trades are finished with their work in the affected areas
    No ongoing electrical, mechanical, or construction work should interfere with testing.

  8. Any punch-list items related to HVAC operation are resolved
    Fixing small issues beforehand prevents failed test results.

 No, the air balance does not include any mechanical acceptance testing unless agreed upon prior to approval of the T&B. The TAB contractor also has to be certified to perform MAT services.

After all mechanical acceptance testing is completed and all systems pass inspection, the NRCA forms and any required documentation should be submitted within 1–3 days.